Board logo

Disabling Bias brake pedals
shindha - 11/7/15 at 08:01 PM

Hi does any body have pictures on how to disable bias pedals they are westfield items, pictures in the link on wscc
link
Sorry cannot post pictures computer broke which had pic on


theprisioner - 11/7/15 at 10:24 PM

Basically you drill a small hole in the pedal and wire each end of the bar thru the pedal.

Hope this helps: http://sylvabuild.blogspot.co.uk/2013/01/the-foot-brake-final-assembly.html


loggyboy - 12/7/15 at 07:04 AM

Some have managed to get away with a nyloc nut. Depends on testers interpretation. Worth a call to ur chosen test station and do it as one of last jobs.
if you just wanna be sure then lock wiring is specifically mentioned in the IVA Manual.