Board logo

Steering Boss
Nick Davison - 16/1/05 at 08:38 PM

Been away for a while so have missed a fair bit so this will have been covered before I expect.

Do I have to fit a collapsible steering boss if I have a Sierra steering column which is it’s self collapsible?


Ben_Copeland - 16/1/05 at 08:40 PM

No, dont think you do have to.

As long as the column can collapse thats all thats required. The sierra column is collapsable btw


Hellfire - 16/1/05 at 09:00 PM

quote:
Originally posted by Ben_Copeland
No, dont think you do have to.

As long as the column can collapse thats all thats required. The sierra column is collapsable btw


Ditto!


Nick Davison - 17/1/05 at 09:10 AM

In that case there is at least one steering boss which will accept a Montery (can't remember how to spell it) steering wheel left in the shop where I bought mine from. It cost me £10. The only mod which will have to be done is fit an imobiliser as there are no notches for the steering lock.


Mark Allanson - 17/1/05 at 08:46 PM

I have the same problem with my cheap boss (the one on the steering wheel and the one I work for!). I am going to use the std sierra wheel (another one as I cut up the old one to see if the original boss would be reuseable). You can get a much more expensive boss from Halfords, but the inner is exactly the same - the teeth are just not big enough for the steering lock pawl to engage Rescued attachment Crappy casting.jpg
Rescued attachment Crappy casting.jpg


ady8077 - 17/1/05 at 08:59 PM

Hi

If its a mountney classic you can use a astrali hub, there quite cheap, collapsable and have the grouves for the steering lock

Dont forget the centre horn push has to be padded

Adrian


Mark Allanson - 17/1/05 at 09:24 PM

I did try to buy an astrali boss online, but could not find anyone selling one


ady8077 - 17/1/05 at 09:35 PM

Hi Mark

I got mine from here

http://www.topsteer.com/

Adrian

Just checked you have to click on hub kits, mountney traditional, £29.95

Adrian

[Edited on 17/1/05 by ady8077]


Lightning - 17/1/05 at 09:42 PM

My car failed not having a collapsible boss. I had a collapsible steering column an offset.

Used an Astralli one to pass £15


Mark Allanson - 17/1/05 at 09:51 PM

Where did you get it from? You are fairly close!


Lightning - 17/1/05 at 09:54 PM

The Gearbox, Exeter.


Mark Allanson - 17/1/05 at 10:07 PM

I will have to pop in next time I see the kids at uni (Bristol & Taunton) unless you are doing anything to Marazion school again soon


Nick Davison - 18/1/05 at 08:47 AM

The boss I have just bought is an Astralli but it didn't look like it would collapse too far, maybe a couple of inches or so. I am quite sure that it didn't have a steering lock facility. I will have a look tonight.


Lightning - 18/1/05 at 10:04 AM

Mark we have finish Marazion, nearest jobs are now in Falmouth.