Board logo

Repeater lights as indicators?
RazMan - 1/2/05 at 10:37 PM

I'm considering using side repeaters as my main indicators. I realise they are quite a bit smaller than standard but I can beef up the bulb wattage (by devious means) to make them more visible.

Will they pass SVA?


Marcus - 1/2/05 at 10:44 PM

I can't see why not. As long as they are of comparable brightness to the rears, they should be ok.

Marcus


RazMan - 2/2/05 at 06:21 AM

Ahh ... I suspected that might be the case


silex - 2/2/05 at 07:53 AM

Side repeaters dont have the same approval numbers as indicators so you won't even find a nice sva man to pass them - they just can't.


RazMan - 2/2/05 at 06:52 PM

The dreaded E numbers strike again

Thanks for the input guys - I will think again.