Board logo

Maximum power on 919cc Blade
welderman - 20/4/05 at 11:15 AM

Just looking at SVA form. Could some one tell me the RPM at maximum power please.

Hellfire - 20/4/05 at 11:37 AM

As its for SVA, I would put down about 9,000. They test the noise levels at 75% of the stated maximum, so best to be on the cautious side. They don't seem to question it.

Andy W - 20/4/05 at 04:05 PM

I put 8k for my zx9, so only got the noise tested at 6k.

welderman - 21/4/05 at 06:57 AM

Ok thanks for the info.