Board logo

Mirrors for SVA
Danozeman - 13/3/06 at 10:25 PM

Does anyone know if these would pass sva? I think they are a bit small but they look good.

[Edited on 13/3/06 by Danozeman]


muzchap - 13/3/06 at 10:27 PM

Dan - they're so small I can't see em - so definite SVA pass

Perhaps you forgot the pic link


Oooh fixed now

[Edited on 13/3/06 by muzchap]


RazMan - 13/3/06 at 10:48 PM

The SVA manual states that they must be able to show a rectangle reflecting surface of 40mm x 70mm minimum. Are they a tad small?

[Edited on 13-3-06 by RazMan]


flak monkey - 13/3/06 at 10:51 PM

They must take a 70x40mm rectangle as said. But at some point along that 70mm length they must also measure 70mm parallel to the 40mm side. (Which is why racetech mirrors wont pass sva...)

David


Humbug - 14/3/06 at 10:10 AM

Not sure about size, but I just saw these on eBay

NTDWM

http://cgi.ebay.co.uk/NEW-MIRROR-SET-SUIT-SEVEN-TYPE-CAR_W0QQitemZ4619629919QQcategoryZ100921QQrdZ1QQcmdZViewItem#ebayphotohosting


Danozeman - 14/3/06 at 05:32 PM

Dam it didnt see them quick enough. What a bargain.