Well the good news is the wheels stayed on whilst driving to the pre SVA MOT.
The bad news is the clutch cable broke and I can't quite get the speedo to register the speed accuratly.
Fortunatly I got it home using a pair of mole grips as a nipple and I think I just need to get the sensor closer to the magnets to get a better reading.
So I'm off out there to do it now the engine will have cooled down a bit, hopefully I can fix it so it stays fixed for the SVA tommorrow........................................

Good luck mate,keep us posted

Just be thankful you are not going to Southampton for your SVA!

Best of luck

John

I passed at southampton 2nd time the guy was fair but one of the worst things ive done in years.Tried to go with with the thought ide fail just to get a list of things to correct and pass

Good Luck

Well, stop waisting time in front of the internet........go and get on with it...

Clutch cable fixed, Phew!
Next.......

Very good luck!
As Bob said, make sure you keep us posted!

Fozzie

Very best of luck!

There's always a £13 bike speedo from Halfords as a make shift. My old one (sigma 1200 I think) took 10 mins to fit & program, (a bit longer for the glue to go off) - just a thought if things get desperate!

Fingers crossed for you anyway.

Cheers,

James.

Well.................. how did you get on Colin? Good news we hope...............

Phil

Ditto

Hoping the absense here is cus He'z bezzin about in it



.... I'll just check for a post titled "Yellow & black 7 seen near Hinckley?"


[Edited on 13/7/06 by skidude88]

Has anyone heard from Colin, or how he got on.....?

Fozzie

Thanks for the vibes dudes, see my new post.
Will be in touch

http://www.locostbuilders.co.uk/viewthread.php?tid=48598