Hi again

What do you all use to cover the front suspension arm mounts and where can i get them from

Cheers

Do you mean the bolt heads that secure the wishbones - nut covers.

or the steering arms - split conduit cable tied on.

If you try a search there will be a few pics from old posts.

Dont forget headlight lens securing screws may need to be covered.

yes the bolts that hold the wishbones on

Built some bulges onto the side of my nose cone to cover top wishbone bolts. Used some covers that I got from ebay for the top ball joints and nut covers for the lower . Radio controlled car tyres for the spring seat/ adjustor and electrical conduit shrouds for the track rod ends

I used a bulkhead grommit to cover the bracket, held in place with a nut cover.

David