I would appreciate some help in sourcing a supplier of a chassis plate bearing the chassis number to satisfy our SVA man.

I believe the frame has to be stamped with the number too; is this correct?. If so will ERS take stamps without badly deforming.

Glad of your help and thank you in advance.

John

just get a piece of ally and stamp your own and rivit on or get a plate engraved at a local trophy shop or market stall (I used this option ) no probs at sva

Thank you Rich, much appreciated.

John

Like Rich says, piece of ally, get it stamped, rivet it somewhere visible on the chassis, cost a couple of quid at the most.

What about one of THESE

I stamped a piece of 18g and welded it onto the chassis as well as stamping the aluminium. Is a riveted plate considered permanent enough for the inspector?

My DVLA said it needed to be on the chassis in at least 2 places. Once can be a riveted plate, the other needs to be a permanent part of the structure. The guy I was speaking to was happy for me to stamp it into the riveted and bonded ali floor though as the permanent one.

David