Board logo

fuel line in tunnel
badding - 17/1/08 at 09:17 PM

hello,

I have a stainless steel fuel pipe running through the tunnel, but it's only connected on 6 places to the chassis, is this enough for sva, will they look into the tunnel to check these things?..


snapper - 17/1/08 at 09:43 PM

If they do look, and they are very thorough, then i think the acceptable clip distance is 300mm for wiring and seems to be the acceptable distance for fuel and brake pipes


Howlor - 17/1/08 at 09:46 PM

They had a mirror at Beverley to have a peek. I think it is 300mm as well for the fuel although the more the merrier.

Steve


stuart_g - 17/1/08 at 11:40 PM

No more than 6 inches between clips.