Board logo

mirror hieght
COREdevelopments - 21/2/08 at 09:35 PM

Hey all. just had my mirrors, gsxr type and have put them on. can anyone tell me if the height will be an issue? are they too low? i have plenty of adjustment was just bit concerned about the height.
here is a pic

thanks

rob

sorry its so big!

[Edited on 21/2/08 by COREdevelopments] Rescued attachment DSC00021.JPG
Rescued attachment DSC00021.JPG

BenB - 21/2/08 at 09:43 PM

As long as you can see over the rear wheel arches to see the SVA test pillar it's okay....

COREdevelopments - 21/2/08 at 09:48 PM

ye can see over the arch, this pic may help. when sitting in the car i can adjust it so can see just the tip of the arch. does this make any sence? Rescued attachment DSC00019.JPG
Rescued attachment DSC00019.JPG

tegwin - 21/2/08 at 10:03 PM

quote:

As long as you can see over the rear wheel arches to see the SVA test pillar it's okay....


Do you have any more details on the "test pillar"?

Size location etc?

Schrodinger - 21/2/08 at 10:30 PM

Look in the SVA manual and it will show you what you should be able to see and it is easy enough to mark out.

caber - 21/2/08 at 11:40 PM

Mine are similar and I had to put them almost at the top of the scuttle. check my avatar!

Caber