so here is the start of some what you might think are obvious questions but do I or don't I to me.

1. Sierra uprights with mushroom adapters. Do I need to drill through the upright and adapters to bolt them together?

2. My front brake hose's go through the fibreglass body sides with penny washers. Do I need chassis mount brackets for these??

More later,
Thanks,
Steve

i had Marc N sort these,
needed washers and a bracket onto the chassis for the fronts.

my uprights are different.

There was a thread on the mushrooms a few months ago. Apparently SVA now want something like a 6mm bolt through the upright into the mushroom.

The mushrooms thing is an easy job anyhow. I just drilled them and ran a tap through. I bet it didn't take half an hour for both.

Don't know about the uprights.

Mine passed with washers either side of the fiberglass, no problem.