Board logo

Breaking down Tiger Avon 2ltr Zetec
Lander - 1/4/17 at 09:53 PM

Hi Guys,
It is with a heavy heart that I have decided to sell everything I have accumulated so far on my Tiger Avon build as there is no way I am going to have the time to get her completed and over the line. I have pretty much everything except lights, and dash instruments that you could possible want so let me know what you are after. Please bear in mind I need to disassemble what has been done so far. Here is a list of the parts that spring to mind.

Tiger Avon Bodywork - All in Black
Wing Stays - SOLD
Roll Bar with rear stays
Brake Calipers
brake flexis pipes
propshaft - SOLD
Tiger harnesses x 2
Tiger Avon Chassis with all ally work complete and full suspension fitted this can have as much or as little attached as you need. Pedals all fitted.
2ltr Zetec engine
Type 9 gearbox - SOLD
Diff and push in driveshafts
Rear Hubs
Front Cortina uprights and hubs
Brand new solid front discs
2 sets of wheels (1 set with tyres)
Full exhaust including manifold - SOLD
Megajolt ECU
Tiger Wiring loom - SOLD
Custom fuel tank - SOLD
Adjustable Seat runner - SOLD
Ripspeed steering wheel - SOLD
Wheel spacers x 4
Brand new radiator
Brand new radiator Fan
Fibreglass Seats x 2 - SOLD
Tiger Racing voucher worth £50

I am sure there are lots more parts, let me know what you are after. All parts located in Cheltenham, happy to post some parts others would need collecting but I do travel quite extensively for the lighter items.

Cheers,

Ian



[Edited on 3/4/17 by Lander]


wowblaauw - 1/4/17 at 09:57 PM

Hi, I'm up for the exhaust and manifold - please post pictures - so I can confirm that this is what I'm after.

Thanks

Craig


wowblaauw - 1/4/17 at 10:01 PM

Possibly seats and runners also.

Pm sent

Thanks

Craig


Inspired_dave - 1/4/17 at 10:08 PM

Possibly interested in Sparco wheel and the brake calipers depending on make/model

I can arrange courier collection through work if you don't happen to be heading East Midlands way.


J90rdn - 2/4/17 at 12:30 AM

Hi. Interested in body work, radiator and tank.

Are the radiator and tank aluminium?

Bodywork - new or used? Any cut outs for exhaust, lights etc?

Thanks


grist_e - 2/4/17 at 07:06 AM

Interested in Rollbar and cycle stays. Steering wheel

Regards
Craig


slingshot2000 - 2/4/17 at 07:20 AM

I am interested in the wing stays. I take it they are to fit Cortina hubs ?

Whoops, hadn't seen Craig's post above.

[Edited on 2/4/17 by slingshot2000]


Russell - 2/4/17 at 08:40 AM

First dibs on the gearbox, and possibly the engine and steering rack too, subject to price. PM me please.


Fandango - 2/4/17 at 08:55 AM

Hi Ian.

Sorry to hear you aren`t able to complete your build.

2nd dibbs on the gearbox. I could come over and help remove it.

Cheers Carl


Lander - 2/4/17 at 09:05 AM

Thanks for the interest guys, hopefully I have answered questions on U2U's I will get pics as requested taken later today and send on.

As things disappear I shall update my original post.

Thanks again,
Ian


Lander - 2/4/17 at 09:10 AM

Thanks Carl.

You are down as reserve on the Gearbox

Cheers,

Ian


Lander - 2/4/17 at 06:48 PM

Pics added to my archive of some bits and pieces as requested.
I think I have responded to all U2U's if I have missed anyone let me know.

Those who have second dibs I will keep you informed.

Thanks for all the interest.

Ian


Fandango - 2/4/17 at 07:56 PM

Hi Ian

I could also be interested in the fuel tank, as mine is a minimal racing one, and I have to fill it up about every ten laps.

Could you get me the dimensions, and capacity pls?

Cheers


snippy - 2/4/17 at 08:59 PM

2nd dibs on rollbar please depending on price.


Lander - 2/4/17 at 09:33 PM

Hi Carl,

The tank measures Width 700mm, Height 215mm, depth (front to back) 190mm.
It has 3 lengths of aluminium fixed to the bottom for fixing to the chassis they are around 260mm running front to back.

There are a couple of people in front of you for the tank.

Snippy, I have sent you a U2U.

Thanks all.


Yorkie - 3/4/17 at 12:01 PM

Interested in diff and shafts, dependent on price and ratio.


Quinten - 3/4/17 at 01:22 PM

I may have missed it, or it is not listed, but I thought I'd better ask... Do you have a flywheel, clutch and coverplate for the Zetec/Type 9?


Lander - 3/4/17 at 05:43 PM

Hi,
Yorkie you have a U2U

Quinten, I don't want to start pulling too much off the engine but will give you a shout if I start to.

Thanks all, if I haven't replied to somebody, let me know.

Ian


Quinten - 3/4/17 at 06:02 PM

Cheers Ian, that's understandable.


Lander - 9/4/17 at 07:37 PM

Updated List of parts ....

Tiger Avon Bodywork - All in Black
Wing Stays - SOLD
Roll Bar with rear stays - SOLD
Brake Calipers
brake flexis pipes
propshaft - SOLD
Tiger harnesses x 2 - SOLD
Tiger Avon Chassis with all ally work complete and full suspension fitted this can have as much or as little attached as you need. Pedals all fitted.
2ltr Zetec engine
Type 9 gearbox - SOLD
Diff and push in driveshafts
Rear Hubs
Front Cortina uprights and hubs
Brand new solid front discs
2 sets of wheels (1 set with tyres)
Full exhaust including manifold - SOLD
Megajolt ECU - SOLD
Tiger Wiring loom - SOLD
Custom fuel tank - SOLD
Adjustable Seat runner - SOLD
Ripspeed steering wheel - SOLD
Wheel spacers x 4
Brand new radiator
Brand new radiator Fan
Fibreglass Seats x 2 - SOLD
Tiger Racing voucher worth £50

Let me know what parts you need.

Thanks,

Ian


knight19770 - 10/4/17 at 07:34 AM

Hi Ian,

Can you U2U me with engine details and also interested in wheel spacers and maybe wheels . Any pics and sizes?

Thanks Mike


Lander - 10/4/17 at 07:39 PM

Thanks Guys,
I think I am back up to date with U2U's, shout if I have missed anyone.

Thanks again,
Ian


Jasmcauley - 16/4/17 at 10:45 AM

price and pics on bodywork please


Lander - 17/4/17 at 03:11 PM

Hi All,
I think I have answered all U2U's. I have also uploaded pics of wheels and Body into my archive as requested.
Please let me know which bits you need asap.
The engine will be pulled next weekend all being well.
Thanks again for all of the interest.
Ian

[Edited on 18/4/17 by Lander]


adamswifty - 19/4/17 at 08:52 PM

Can you u2u a price for the bodywork


Lander - 20/4/17 at 07:27 AM

Adam,

U2U sent.


Lander - 30/4/17 at 10:23 PM

All that's left ....

Tiger Avon Bodywork - All in Black
Brake Calipers
brake flexis pipes
Tiger Avon Chassis with all ally work complete and full suspension fitted this can have as much or as little attached as you need. Pedals all fitted.
2ltr Zetec engine
Rear Hubs
Front Cortina uprights and hubs
Brand new solid front discs
2 sets of wheels (1 set with tyres)
Wheel spacers x 4
Brand new radiator
Brand new radiator Fan
Tiger Racing voucher worth £50


rash12 - 5/5/17 at 08:18 AM

how much for the bodywork please?


Lander - 6/5/17 at 03:35 PM

Rash12.

I have sent you a U2U.

Thanks,

Ian


Just18972 - 6/5/17 at 04:25 PM

quote:
Originally posted by Lander
All that's left ....

Tiger Avon Bodywork - All in Black
Brake Calipers
brake flexis pipes
Tiger Avon Chassis with all ally work complete and full suspension fitted this can have as much or as little attached as you need. Pedals all fitted.
2ltr Zetec engine
Rear Hubs
Front Cortina uprights and hubs
Brand new solid front discs
2 sets of wheels (1 set with tyres)
Wheel spacers x 4
Brand new radiator
Brand new radiator Fan
Tiger Racing voucher worth £50

What wheels are they please?