FASTdan
|
| posted on 13/2/09 at 02:55 PM |
|
|
switch symbols/ID's
are dash switches (eg fog light) required to be identified with a symbol or text? or can they just be blank?
also, are they requried to illuminate when active and/or be backlit (I assume this will be required)?
cheers
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
Mr Whippy
|
| posted on 13/2/09 at 03:02 PM |
|
|
Should be marked as you suggest plus they should light up when active
[Edited on 13/2/09 by Mr Whippy]
Fame is when your old car is plastered all over the internet
|
|
|
matt_claydon
|
| posted on 13/2/09 at 03:22 PM |
|
|
No, in general not for SVA. However, brake warning light must have symbol and a few specified controls must have a tell-tale which lights up
when the switch is on (e.g. fog light, main beam)
|
|
|
iank
|
| posted on 13/2/09 at 03:29 PM |
|
|
IVA introduces the requirement for switches/telltales to be marked. The symbols required are in the IVA manual draft.
Switch isn't required to light up when active, but if it's got a light in it then it can be a telltale.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
