Richard Quinn
|
| posted on 2/4/09 at 03:09 PM |
|
|
SVA Fail - Chadderton
Thought I'd better admit it...
Failed at Chadderton this morning but I would like to say that this was my first SVA experience and, although I wasn't nervous or stressed, it
was a great experience. The inspector was a credit to VOSA and really chatty explaining what he/I was doing every step of the way. He was extremely
patient when my gear cable decided to come apart (not the fixings, the actual cable shroud) at one end meaning getting neutral became a bit of a
challenge.
Anyway, the fails...
Emissions - this was the biggy and somewhat expected to be honest. He allowed me plenty of laptop time on the Powercommander but I just couldn't
get it. Low HC and CO and high Lambda or the other way round. Any suggestions gratefully received!
One brake flexy touching the bodywork on full lock.
Couple of wires need further securing.
My sierra column, put in for SVA instead of my nice shiny billet jobby, had too much play. He wants me to re-present with the aftermarket column
fitted now.
So, apart from the emissions, half a shift should see it sorted.
Thanks to you all on here for the help and advise that you have unknowingly provided over the last year and a bit and a big thanks to TigerB6Paul for
his help during the last part of the build and the moral support this morning, particularly at stupid o'clock this morning when my trailer
lights wouldn't work!
|
|
|
|
|
welderman
|
| posted on 2/4/09 at 03:36 PM |
|
|
not a bad fail, im back there tomorrow, just emmissions, i had better pass this time.
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
RichardK
|
| posted on 2/4/09 at 03:57 PM |
|
|
Not too bad, I think it's strange he wants you to represent with the other columb on, what happens if he doesn't do the retest or
something.
Very strange, haven't heard that one before.
Well all said and done that is about a good a fail as you can get.
Cheers
Rich
[Edited on 2/4/09 by RichardK]
Gallery updated 11/01/2011
|
|
|
mad-butcher
|
| posted on 2/4/09 at 04:12 PM |
|
|
not to bad a fail, chester dvla are fine to deal with once you actualy get to see the guy. paul sargeant is who you need
tony
|
|
|
Paul TigerB6
|
| posted on 2/4/09 at 05:37 PM |
|
|
You forgot to mention breezing through noise emissions - 100.9dB !!!! 
Just to re-itteratehe just how helpful the SVA guy really was - i am back there in 2 weeks so he was giving me all the help and advice he could of
areas to check when going over Richard's car.
.jpg)
|
|
|
rusty nuts
|
| posted on 2/4/09 at 05:51 PM |
|
|
Check your exhaust system for leaks, even the smallest will cause a high Lambda reading.At least you know what you have to fix.
|
|
|
Richard Quinn
|
| posted on 2/4/09 at 05:51 PM |
|
|
Yeah but that was at 200rpm more than it should've been! Also, the fan was on and the bonnet wasn't fastened down, it's not really
that loud I was also quietly pleased with the amount of attention my engine drew.
[Edited on 2/4/09 by Richard Quinn]
|
|
|
chris_smith
|
| posted on 2/4/09 at 06:45 PM |
|
|
well done good fail really, have to agree the guys at chad are helpful i was tested by geoff couple of weeks back, very helpful indeed
did you book re-test? mine is on 27th april
cheers
chris
The secret of success is to know something nobody else knows."
|
|
|
Richard Quinn
|
| posted on 2/4/09 at 06:47 PM |
|
|
Not booked the retest yet. I need to get some idea where I heading on the emissions issue first. Good luck with the retest
|
|
|
.jpg)
