Tinks1
|
| posted on 2/4/09 at 04:30 PM |
|
|
VIN
Do I need a supplementary VIN plate say on the bulkhead cannot find any reference to this in the manual. If so do I require any other info than VIN. I
have welded plate on chassis
Cheers
JST
|
|
|
|
|
ReMan
|
| posted on 2/4/09 at 08:03 PM |
|
|
NO
|
|
|
MautoK
|
| posted on 3/4/09 at 12:00 AM |
|
|
I tried to cover all the bases with:
1. Steel plate welded to chassis (under nose cone)
2. Al plate pop-riveted to chassis in boot
3. Stamped the floor in front of the driver's seat
4. Directly stamped the chassis in a couple of places.
It was acknowledged at the SVA that all this was more than required.
But better two too many than one too few!
He's whittling on a piece of wood. I got a feeling that when he stops whittling, something's gonna happen. (OUATITW/Cheyenne)
|
|
|
Jasper
|
| posted on 3/4/09 at 09:54 AM |
|
|
Does it have to be on a particul;ar side of the engine bay? Mines on the drivers side....
If you're not living life on the edge you're taking up too much room.
|
|
|
Mark G
|
| posted on 3/4/09 at 07:11 PM |
|
|
I called the SVA centre today regarding my chassis number, the chap on the phone said I'd be ok with one number stamped onto a plate riveted to
the chassis. Preferably on the n/s of the car.
|
|
|
