nitram38
|
| posted on 19/4/09 at 05:20 PM |
|
|
SVA tomorrow at Mitcham 9am
Well, all prepared (as well as I can be!) 
I did a last minute job today and that was to make a plate and leatherette that covered the buttons on my veypor dash. This was because of some of
you failing on the ability to change away from the speedo reading.
I've measured my speedo against my sat nav and it seems spot on, so hopefully I won't need to do any adjustments!
The only two worries I have are noise and emmissions.
The emissions as I have only a borrowed map and my wideband to go by and noise, as I only have a cheap noise meter.
Thanks to everyone who either sent me stuff, made stuff (F.O.C.) etc and for all the help with questions!
You know who you are!
[Edited on 19/4/2009 by nitram38]
|
|
|
|
|
grazzledazzle
|
| posted on 19/4/09 at 05:35 PM |
|
|
Good luck Martin, I've been following with interest 
|
|
|
richard
|
| posted on 19/4/09 at 05:37 PM |
|
|
good luck.
|
|
|
cloudy
|
| posted on 19/4/09 at 05:40 PM |
|
|
All the best!
www.warnercars.com
|
|
|
adithorp
|
| posted on 19/4/09 at 05:42 PM |
|
|
Good luck Martin. Enjoy the day.
Noise and emmisions are the 2 things you can't be sure of untill the test.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
speedyxjs
|
| posted on 19/4/09 at 05:54 PM |
|
|
Good luck Martin
|
|
|
russbost
|
| posted on 19/4/09 at 06:10 PM |
|
|
Best of luck - you know it will pass!!!
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Hammerhead
|
| posted on 19/4/09 at 06:27 PM |
|
|
good luck to you.
|
|
|
daniel mason
|
| posted on 19/4/09 at 06:37 PM |
|
|
good luck mate and let me know how you get on with the veypour as i have same problem with veypour
|
|
|
richardh
|
| posted on 19/4/09 at 06:37 PM |
|
|
good luck
Time for a change!
|
|
|
madteg
|
| posted on 19/4/09 at 07:34 PM |
|
|
Best of luck.
|
|
|
fideel109
|
| posted on 19/4/09 at 07:47 PM |
|
|
All the best of luck, who dear to fail so a well engineered car...
|
|
|
Kosmo
|
| posted on 20/4/09 at 06:41 AM |
|
|
Good luck.... great looking car.
|
|
|
nitram38
|
| posted on 20/4/09 at 12:22 PM |
|
|
Failed......., but not too bad!
Projections, wants grills to the rear/sides and another grill/barrier under the passenger dash.
A bit too much overkill.
Shock absorbers need a bit of trim around the top edge.
Fire extinguisher failed on projections even though it is behind my seats!
My stick on/cable tied side indicators not good enough to be secure. Suggested I screw them but that would go through the led circuit board. So I
need some torpedo types to go on the side rail.
Nose needs some edge trim inside where the fibreglass ends.
And last, I need a new silencer!
103.2dbA at 8800 rpm 
Thanks to Taylor R1 and his map, the car sailed through emissions.
Everything else spot on including the brakes.
The best news was the weight..........480Kg!!!!
And I weighed myself on the weigh bridge too.
Christmas I weighed 105KG
Now I only weigh 90kg
So now the car will go faster!
|
|
|
PaulBuz
|
| posted on 20/4/09 at 04:51 PM |
|
|
good luck
ATB
Paul
|
|
|
richardh
|
| posted on 27/4/09 at 06:00 PM |
|
|
good fail - if such a thing really makes sense
Time for a change!
|
|
|
.jpg)
