Davegtst
|
| posted on 14/6/11 at 07:01 PM |
|
|
Nosecone grille for IVA
What's legal nowadays? Can i use this stuff or will it be too sharp?
Black mesh
|
|
|
|
|
adithorp
|
| posted on 14/6/11 at 07:29 PM |
|
|
Don't know about IVAproofness, but it's rubbish as a grill. It has a lot more ally than holes and really restricts air flow. You're
much better off with woven stainless mesh (and it's IVA safe) than expanded ally mesh.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
matt_claydon
|
| posted on 14/6/11 at 08:15 PM |
|
|
I second that. Had that on my grille and was plagued with cooling problems for three years until I tried removing it and then ll of a sudden
everything was fine! From an airflow point of view you couldn't really design worse.
It should be ok for IVA though.
|
|
|
craig1410
|
| posted on 15/6/11 at 12:32 AM |
|
|
I used the aluminium mesh for SVA and it was fine but as has been mentioned, it's not the most efficient for airflow.
Here is the stuff you want:
http://www.lockwoodinternational.co.uk/stainless-steel-grille-mesh-c483.html
I'm planning to get some to replace my aluminium grille.
Cheers,
Craig.
|
|
|
