DANMAN
|
| posted on 19/4/12 at 11:23 PM |
|
|
What light weight Cat to use?
I need to organise a cat converter for the car which needs to be a 2" inlet and outlet. I obviously want one that flows as well as possible but
I also want it to be as light as possible. Any suggestions?
|
|
|
|
|
chris_harris_
|
| posted on 20/4/12 at 05:59 AM |
|
|
I bought one of eBay in the states. Small universal one. Worked fine for the sva.
Regards Chris
|
|
|
twybrow
|
| posted on 20/4/12 at 10:43 AM |
|
|
I used the same one from the States. About $50 USD and it seems to work just fine...
If you want to go really light, you could look to aquire a bike exhasut with one in, but they are usually very small Catc (kittens almost!), so you
may not find it is effective on the emissions.
|
|
|
JekRankin
|
| posted on 20/4/12 at 12:56 PM |
|
|
I'm looking for one too. Is this the one from the states you bought?
Thunderbolt Universal Catalytic Converter 2' OBD II Compliant Cats | eBay
Cheers,
Jek
|
|
|
DANMAN
|
| posted on 20/4/12 at 01:05 PM |
|
|
I need one no longer than 220mm in length which it seems are hard to find.
|
|
|
