rash12
|
| posted on 5/3/14 at 09:13 PM |
|
|
iva
almost ready for the iva what trim have people used on the centre mirror to achieve the correct radius around the edge ?
|
|
|
|
|
serieslandy
|
| posted on 5/3/14 at 09:46 PM |
|
|
What mirror have you got?
I've got a racetech mirror and used some rubber trim This stuff. stuck on with contact adhesive. I also used a
20mm swa boot to cover the lower nut.
|
|
|
corrado vr6
|
| posted on 5/3/14 at 10:43 PM |
|
|
I used this trim stuck on with mitre fix
http://m.ebay.co.uk/itm/261407136956
http://www.toolstation.com/m/part.html?p=47409
http://r1indy7.wordpress.com/
|
|
|
rash12
|
| posted on 6/3/14 at 11:35 AM |
|
|
thanks for the links much appreciated
|
|
|
40inches
|
| posted on 6/3/14 at 12:46 PM |
|
|
If you look at the bottom right of page 413 in the
CBS Catalogue. There is a how to. I super glued the ends of the trim to form a gasket and just slipped it onto the mirror. It
didn't fall off until after IVA!
|
|
|
