Avoneer
|
| posted on 21/7/05 at 09:28 PM |
|
|
LED's as tell tales???
Can I use a red LED as a hazard warning tell tale and another as a handbrake/low brake fluid tell tale if they have the appropriate lable next to
them?
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
|
|
Snuggs
|
| posted on 21/7/05 at 09:34 PM |
|
|
IIRC the symbols must be illuminated.
----------------------------------------------------------------------------------------------------
http://www.topcashback.co.uk/ref/snuggstcb
Spider pig, spider pig, does whatever a spider pig does.
I doubt therefore I may be.
Luposlipophobia : Fear of being chased by wolves around a freshly waxed kitchen floor, while wearing only socks on your feet.
My mind not only wanders, sometimes it leaves completely!
http://www.venganza.org
http://www.jesusandmo.net/
http://www.snuggs.co.uk
|
|
|
carnut
|
| posted on 22/7/05 at 08:17 AM |
|
|
I failed sva for this. The handbrake warning needs to be lit up not just a bulb with a label under it. Another shite rule.
|
|
|
DarrenW
|
| posted on 22/7/05 at 10:17 AM |
|
|
Can you not simply engrave the symbol onto the front of LED - or is it too small??
Bright 6?
|
|
|
JAG
|
| posted on 22/7/05 at 11:36 AM |
|
|
The handbrake/low brake fluid light is the only one that needs to be marked.
ALL the other lights can be coloured bulbs/LEDs without any markings. That's how my car passed its SVA test.
Justin
Who is this super hero? Sarge? ...No.
Rosemary, the telephone operator? ...No.
Penry, the mild-mannered janitor? ...Could be!
|
|
|
NS Dev
|
| posted on 22/7/05 at 12:07 PM |
|
|
I'm getting my mate to engrave the face of one of my warning LED's for the brake warning.
|
|
|
%20(WinCE).JPG)
