Avoneer
|
| posted on 24/12/05 at 12:05 AM |
|
|
Headlamp height ???
Anyone know what the bottom of the light should be ???
Was it 400mm from the floor?
Cheers,
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
|
|
RazMan
|
| posted on 24/12/05 at 09:19 AM |
|
|
The minimum height for dipped beam is 500mm. (There is no minimum for main beam)
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Tigger
|
| posted on 24/12/05 at 09:27 AM |
|
|
The maximum headlight height is 1200mm
Take a look at the
1989 Lighting Regulations
HTH
Tigger
[Edited on 24/12/05 by Tigger]
[Edited on 24/12/05 by Tigger]
|
|
|
Avoneer
|
| posted on 24/12/05 at 10:44 AM |
|
|
Cheers guys.
Sorted my mounts now.
My mount is now 450mm from the floor, but I can raise the suspension for SVA.
Ta,
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
smart51
|
| posted on 24/12/05 at 10:48 AM |
|
|
the minimum height is 500 mm from the floor, but this point can be anywhere within the illuminated area of the lens. If the bottom of your lens is
450mm from the ground and the top os 505mm, then you're OK.
|
|
|
RazMan
|
| posted on 24/12/05 at 11:00 AM |
|
|
quote:
Originally posted by smart51
the minimum height is 500 mm from the floor, but this point can be anywhere within the illuminated area of the lens. If the bottom of your lens is
450mm from the ground and the top os 505mm, then you're OK.
Definitely wrong I'm afraid - 9.1 Note 1 states that the minimum distance is measured at the lowest point of the illuminated area. 
Does your suspension jack up by 50mm then Pat?
[Edited on 25-12-05 by RazMan]
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
%20(WinCE).JPG)
