diyer
|
| posted on 21/1/06 at 06:45 PM |
|
|
fuel pipe runs
This might sound stupid, but if i run my plastic fuel inlet and return pipes through a piece of plastic conduit can i fix the it to the bodywork at
longer distances that 300mm??
cheers
|
|
|
|
|
rusty nuts
|
| posted on 21/1/06 at 06:51 PM |
|
|
Wouldn't have thought so , just my opinion of course . I would rather they were secured with the proper clips at 300mm or less apart.
|
|
|
britishtrident
|
| posted on 21/1/06 at 07:12 PM |
|
|
You would need to protect the pipes inside the conduit AND fasten the conduit every foot --- own goal.
|
|
|
diyer
|
| posted on 21/1/06 at 07:30 PM |
|
|
i was thinking it was easier to just put single clips round the conduit than seperate ones round the fuel pipes, in the position i want the run to
go.
Thanks
|
|
|
DarrenW
|
| posted on 21/1/06 at 10:26 PM |
|
|
This is one area whre the book is absolutely specific - must be fixed at intervals of not more than 300mm.
|
|
|
.jpg)
