whitestu
|
| posted on 29/1/06 at 11:44 AM |
|
|
Fuel filler pipe
Any suggestions where to source a suitable pipe to fun from the tank to the fuel filler?
Does fuel pipe need to have the correct markings for the SVA?
Thanks
Stu
|
|
|
|
|
jimgiblett
|
| posted on 29/1/06 at 11:55 AM |
|
|
I used the flexi Fuel filler pipe as sold by Europa.
No Problem at SVA
Link Here
- Jim
|
|
|
RazMan
|
| posted on 29/1/06 at 12:32 PM |
|
|
I got mine from Europa but as I needed 90 degree bends and straight pieces it ended up quite expensive (twin tanks) at £100 
Looks the part though 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
stevec
|
| posted on 29/1/06 at 01:44 PM |
|
|
Demon freeks do it 25p a cm.
[Edited on 29/1/06 by stevec]
|
|
|
bob
|
| posted on 29/1/06 at 01:59 PM |
|
|
http://www.thinkauto.com
|
|
|
Chippy
|
| posted on 29/1/06 at 06:47 PM |
|
|
ASAP do both straight pipe, and bends, (and for a lot less than £100). They do mail order and have a good web site.
|
|
|
Grahame L
|
| posted on 29/1/06 at 08:21 PM |
|
|
For what its worth i used a 90 degree polished aluminium induction tube bought from motorworld, looks good and cheap too at about £20!!
|
|
|
Deckman001
|
| posted on 29/1/06 at 08:30 PM |
|
|
I used rally design http://www.rallydesign.co.uk/catalog/advanced_search_result.php?keywords=filler+hose
I got a very good service off em, I poped in and they cut it while i waited
Jason
|
|
|
DarrenW
|
| posted on 29/1/06 at 09:58 PM |
|
|
Mine was bargain from Mac#1. They also supplied a letter to satisfy SVA.
|
|
|
