NS Dev
|
| posted on 4/9/06 at 11:52 AM |
|
|
attaching fuel injection loom to fuel rail
ok, any suggestions for an elegant and SVA friendly way of attaching a rather nice raychem heatshrink covered injection system loom to a fuel rail?
I'd like to cable tie it on as per every other setup I have done but I guess SVA may not like this?
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
|
|
iiyama
|
| posted on 4/9/06 at 12:51 PM |
|
|
Dont see why not? The Hayabusa factory loom was tie wrapped to the fuel rail in 2 or 3 places.....
Just removed it all to fit a billet fuel rail.
|
|
|
NS Dev
|
| posted on 5/9/06 at 08:50 AM |
|
|
its now cable tied on!
we'll see what mr SVA says!
cheers
Nat
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
