02GF74
|
posted on 13/11/06 at 02:41 PM |
|
|
2 SVA clarifications
1. The 127 mm exclusion zone around the steering wheel.
- does this mean the lower dash edge is exempt from the radiussing stuff if it falls within the zone?
2. front wings
- when viewed vertically from above, does the whole tyre need to be covered or just the wheel
i.e. can the wings be fitted so the bit of tyre in front of the wheel can be seen as this would allow the wings to cover more of the rear of the tyre
preventing crap being thrown up. (I haven't found the place in the manual that states this clearly).
|
|
|
Marcus
|
posted on 13/11/06 at 02:48 PM |
|
|
1. Yes
2. Just the wheel
Marcus
Because kits are for girls!!
|
|
russbost
|
posted on 13/11/06 at 03:43 PM |
|
|
Confirmed - take a line vertically upwards from the plan form of the wheel, the wing must cover this
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
02GF74
|
posted on 13/11/06 at 04:22 PM |
|
|
quote: Originally posted by russbost
Confirmed - take a line vertically upwards from the plan form of the wheel, the wing must cover this
okey dokey; but what about the side wall - most tyres protrude a bit pastthe wheel?
just curious as this was an SVA failure - I didn;t ask to have it clraified but I'm sure the arch covered the weel but probably not the tyre.
not that it matters too much since I have new special SVA friendly wheels and be making stays for the new wings so it should be ok this time round.
|
|