Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: What engine revs for sva emissions?
desyboy

posted on 28/1/07 at 09:04 AM Reply With Quote
What engine revs for sva emissions?

Ive just had a my car gas analysed at an mot station and they were: CO .0003, PPM 5 and the lambda just made below 1.03 at 3500 to 4500 rpm. What engine revs are used for sva emissions . Do you think this would pass sva?

Cheers Des

View User's Profile View All Posts By User U2U Member
novacaine

posted on 28/1/07 at 10:07 AM Reply With Quote
dont hold me to this but i though it was 3/4 of your max revs, such as if your engine does 8000rpm they test at 6000 but i might be wrong/confusing this with motorsport...

cant say for sure...

matt





And you run and you run to catch up with the sun but its sinking, Racing around to come up behind you again, the sun is the same in a relative way but your older, shorter of breath and one day closer to death

View User's Profile E-Mail User View All Posts By User U2U Member
rusty nuts

posted on 28/1/07 at 10:11 AM Reply With Quote
The 3/4 max revs is for the noise test . Mot test levels are around 3,000 rpm
View User's Profile View All Posts By User U2U Member
smart51

posted on 28/1/07 at 10:14 AM Reply With Quote
for emmissions its 2500 RPM

for noise its 2/3 max power

View User's Profile View All Posts By User U2U Member
davrus

posted on 28/1/07 at 10:20 AM Reply With Quote
as mentioned , the rpm for emissions is any where from 2500 rpm to 3000 , the max for lambda is 1.03 so a little close there but once the revs are between those limits then the reading should come down , ave reading is 1.00 on lambda.

Cheers





Check out my website http://www.thedave.co.uk/
Feel free to sign my guest book in the links page.

View User's Profile E-Mail User View All Posts By User U2U Member
esn163

posted on 28/1/07 at 11:13 AM Reply With Quote
Just to confirm

BET / CAT Test

Fast idle (2500-3000rpm)

CO<=0.3%
HC<=200ppm
Lambda 0.97-1.03

Idle Test (450-1500rpm)
CO<=0.5%

(From Mar '04 SVA manual)

Noise is at 3/4 max power as already said

HTH

Ed



[Edited on 28/1/07 by esn163]





Indy Build Photos
** Build pages **
Photo Bucket Pics

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
02GF74

posted on 29/1/07 at 10:03 AM Reply With Quote
IGNORE what I wrote; though you were asking about noise .... and I got that wrong too

[Edited on 30/1/07 by 02GF74]

View User's Profile View All Posts By User U2U Member
desyboy

posted on 29/1/07 at 05:45 PM Reply With Quote
cheers everyone so which is it 2/3 of max power or 2500 to 3000 rpm?
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.