Kevin
|
 posted on 27/6/10 at 02:42 PM |
|
|
Side repeaters on clamshell wings
I want to fit side repeaters on top of my front clamshell wings, or do I have to fit them ont the outer edge?
|
|
|
|
|
speedyxjs
|
| posted on 27/6/10 at 03:18 PM |
|
|
Are you pre or post IVA? I dont think you can have clamshell wings for IVA as they dont meet the requirements for covering the wheels.
How long can i resist the temptation to drop a V8 in?
|
|
|
Kevin
|
| posted on 27/6/10 at 03:30 PM |
|
|
I am pre IVA. I am not sure but understand that the westfield wings are no good but the clamshell wings I have are OK. I have looked at the diagram
that is shown on wheel coverage and seems that I will meet the requirements. I am still at the stage where I can change to cycle wings but the lotus
seven used these and I prefer the look.
|
|
|
jacko
|
| posted on 27/6/10 at 03:39 PM |
|
|
I think the clamshell wings have to be like the Morgan ones
|
|
|
Kevin
|
| posted on 27/6/10 at 03:47 PM |
|
|
I have just looked at the diagram again and it says that The wheel guard must extend at least 30 degrees from the centre of the wheel to the front.
The wheel guard must extend at least 50 degrees from the centre of the wheel to the rear, and The rear of the wheel guard must not terminate above a
horizontal plane of 150mm above the wheel centre.
|
|
|
Kevin
|
 posted on 27/6/10 at 03:50 PM |
|
|
My wings seem to meet this but want to be sure. This site is just ace as there is always some one willing to help
|
|
|
jacko
|
| posted on 27/6/10 at 04:31 PM |
|
|
Do you have any photos of the clamshell wings?
From what you say it seems you will be ok but best to check maybe with vosa
|
|
|
Kevin
|
| posted on 28/6/10 at 08:07 PM |
|
|
Going to change to cycle wings don't want to take a chance on clamshell wings.
Many Thanks
|
|
|
prawnabie
|
| posted on 28/6/10 at 08:09 PM |
|
|
Dont forget to change back after!!
|
|
|
Kevin
|
| posted on 28/6/10 at 08:16 PM |
|
|
Yes I will put them on the shelf for now!!!!!
|
|
|
