Andy W
|
| posted on 27/7/04 at 09:41 PM |
|
|
MK SVA PASS AT BEVERLEY
Just passed today at Beverley. A couple of close calls though. The fan did not cut in during emmisions (had worked ok up to now) the cap on the
expension worked well blowing on que. Hot wired the fan to run all the time and emmisions were fine. For interest the cat was from a fiesta, I had the
air screws 2 turns out. I fitted air bleed valves to the inlet manifold but had them shut off. I found the people at Beverley to be helpful and
fair. Just waiting for car to be inspected now. I hope to be at Harrogate in it.
Andy
|
|
|
|
|
Avoneer
|
| posted on 27/7/04 at 09:49 PM |
|
|
Congrats!
I was done for 11.00 with a fail, but only on emissions and my speedo was sticking at 30 mph - gauge fault.
Pat....
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
Andy W
|
| posted on 27/7/04 at 09:55 PM |
|
|
Hope you get sorted soon, emmisions were may main concern. I had a couple of Saturday mornings with MOT mans emmision's machine. Plus it was an
excuse to drive the car. Good look I'm sur you'll sort it
Andy
|
|
|
mangogrooveworkshop
|
| posted on 28/7/04 at 03:57 AM |
|
|
Well done. I like that in your face kinda colour.....and bit off topic whats that space frame hiding in the corner of your workshop! Looks kinda
offroady buggy thingy?
|
|
|
Andy W
|
| posted on 28/7/04 at 08:05 PM |
|
|
Its a madtrax chassis with a 350 powervalve engine. I bought a used chassis and built my own wishbones, steering etc. It was finished about 7 years
ago just really needs a good service. I had the engine running last year, I might spend a bit of time on it winter.
|
|
|
jacko
|
 posted on 28/7/04 at 08:06 PM |
|
|
SVA PASS
HI ANDY Just like to congratulate you one more time on you sva pass. I told you it would pass first time. You better be ready for Harrogate show. Im
wating for a blast up there with you. In both cars of course. See you when we get back of hols. Graham
|
|
|
%20(WinCE).JPG)
