Avoneer
|
| posted on 7/8/04 at 06:00 PM |
|
|
Front Number Plate
What have people done?
DVLA says: "Certain imported vehicles may be permitted to display number plates with smaller characters if the vehicle does not have European
Community Whole Vehicle Type Approval and the vehicle's construction/design cannot accomodate standard size number plates "
I'd say my Tiger doesn't accomodate standard size numbers and isn't type approved, so where can I get a small plate?
Cheers,
Pat...
[Edited on 7/8/04 by Avoneer]
[Edited on 7/8/04 by Avoneer]
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
|
|
Viper
|
| posted on 7/8/04 at 06:45 PM |
|
|
there is a company onlune (sorry lost the link) that do plates in different sizes i had one for my bike was about 65mm tall 350mm or so long.
|
|
|
Avoneer
|
| posted on 7/8/04 at 08:07 PM |
|
|
Would that be with a white background?
Struggling to find any dodgy sites that will do it!
Are you gonna finish this year?
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
Viper
|
| posted on 7/8/04 at 08:13 PM |
|
|
It was a rear, but it was only a cut down standard one.
finished this year? depends if i get pissed with it again
engine should be ready in a couple of weeks and it will be going to the paint shop in september (with a little luck) next big purchase is the
harnesses (nearly £400) hope to sva next spring, i want to go to Le Mann in it next year.......
|
|
|
Avoneer
|
| posted on 7/8/04 at 08:30 PM |
|
|
Found a site to do a 12" x 3" front plate - what do you reckon????
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
Viper
|
| posted on 7/8/04 at 08:38 PM |
|
|
sounds like what i would go for
we are gonna have to have an Avon get together soon, at a show, there will soon be enough of us to have a few beers and swop build storys
|
|
|
Viper
|
| posted on 7/8/04 at 08:40 PM |
|
|
gonna have a look in chat.
|
|
|
Lightning
|
| posted on 7/8/04 at 09:11 PM |
|
|
when you get it show us a pic, as I dont like mine. It looks lke an air dam!!
Steve
|
|
|
Northy
|
| posted on 8/8/04 at 07:04 AM |
|
|
Link?
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing! 
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
|
Mark Allanson
|
| posted on 8/8/04 at 08:57 PM |
|
|
quote:
Originally posted by Avoneer
Found a site to do a 12" x 3" front plate - what do you reckon????
Its all post SVA, I am going to use italian front plates. my local factor will do them. If I get pulled, a copy of my (yet to be awarded) MAC will be
shown to PC Penberthy and a tale that it passed SVA with them, are you going to make a total tit of you self by taking the matter further
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Stuart Walker
|
| posted on 8/8/04 at 10:43 PM |
|
|
These guys do them, are they allowed on the back too or is it just the front?
See "Off-Road Bikes"
Quite fancy one for mine, reckon I could get a few more horses!! Is it all post-SVA stuff?
|
|
|
Stuart Walker
|
| posted on 8/8/04 at 10:44 PM |
|
|
liked this too...
"This product will reflect a speed camera’s flash and stop you getting a speeding fine, that is why it’s PARAMOUNT this spray is not used on
your number plate! It has many other uses."
like what exactly?!
|
|
|
%20(WinCE).JPG)
