spdpug98
|
| posted on 20/4/09 at 06:34 PM |
|
|
SVA Emissions
I am hoping to try and get my car to a mates MOT station on Saturday to test the emissions / lights etc prior to my SVA on Monday
Is there anywhere I can find what level the emissions should be for the SVA on a 2003 R1 engine
My Blog: http://spdpug98.wordpress.com/
|
|
|
|
|
bassett
|
| posted on 20/4/09 at 06:42 PM |
|
|
tested at idle 450 - 1500rpm need
co2 - 0.5
fast idle test 2500 - 3000rpm
co2 - 0.3
hydrocarbons - 200
Lambda 0.97 - 1.03
Out of interest what cat are you using. Also be careful not to ruin your mates probe as my mates was melted after all our testing on sat.
Cheers
Adam
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
spdpug98
|
| posted on 20/4/09 at 06:46 PM |
|
|
Thanks
Adam - I hope to be using MNR's CAT will find out tomorrow, will have to be careful with the probe my mate would kill me if it melted!!!!
[Edited on 20/4/09 by spdpug98]
My Blog: http://spdpug98.wordpress.com/
|
|
|
bassett
|
| posted on 20/4/09 at 06:57 PM |
|
|
Hi, hope you get one as atleast its tried and tested unlike my ebay special which could be my current problem rather than fueling. Make sure your mate
knows they run hot so its his fault if it melts . get it hot, upload a map leave it a min then test and get out and just repeat that process. If it
goes well let me know as i need to make some changes to mine.
Adam:
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
spdpug98
|
| posted on 20/4/09 at 07:00 PM |
|
|
quote:
Originally posted by bassett
If it goes well let me know as i need to make some changes to mine.
Adam:
No problem - will do 
My Blog: http://spdpug98.wordpress.com/
|
|
|
Wheels244
|
| posted on 20/4/09 at 09:52 PM |
|
|
Dave\Adam
I will send you both the map I passed with today after I've uploaded it tomorrow.
Rob
|
|
|
