lotusmadandy
|
| posted on 2/9/09 at 06:57 PM |
|
|
2 litre pinto for sale
Guy's
further to my previous post about selling my rebuilt pinto,i am now putting it up for sale.
It is an 89 205 block with injection head
Rebuilt with new shells and rings 1000 miles ago.The block was honed before refitting the pistons.
All of the valves were ground in and new seals fitted.A complete gasket set has also been fitted.
It has a modded sump and rocker cover
and will come with a bike carb inlet manifold (made by me) ,a stainless exhaust manifold, repackable silencer,ford electronic ignition system and bike
carb fuel pump.The engine has excellent oil pressure and is spotlessly clean.
It was suggested on here that i could maybe make £300-400 on the bay but would like to offer it to you guys first.
If anyone is interested i would like to get £300ish for the lot but am open to offers and may split it up if there is enough interest.
By the way it is still in my mk so it can be seen and driven.
Andy
[Edited on 2/9/09 by lotusmadandy]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Yorkie
|
| posted on 2/9/09 at 07:47 PM |
|
|
u2u sent.
|
|
|
anthony.french@live.com
|
| posted on 5/9/09 at 09:39 PM |
|
|
Is this engine still available? If so I have a few questions please.
1. Whats the power output?
2. Is it running a standard head and CAM?
3. Got any pics?
Thanks,
|
|
|
lotusmadandy
|
| posted on 6/9/09 at 03:31 PM |
|
|
Hi Anthony,
I still have the engine at the moment
but have strong interest from another
locost member.
The engine with bike carbs puts out around the 130 mark.
It has a standard injection head and cam
but the injection head has bigger ports than the carb head.
I had always intended to fit an fr33 cam after it was run in.
If you send your email i will send the pics but cannot sell until it
has been viewed by the other interested member.
best regards,
Andy
|
|
|
anthony.french@live.com
|
| posted on 6/9/09 at 05:49 PM |
|
|
No worries.
Please send me the pics on anthony.french@live.com
If the other interested party does not purchase then please just let me know.
Thanks,
|
|
|
lotusmadandy
|
| posted on 7/9/09 at 07:44 PM |
|
|
SOLD to yorkie, subject to test drive
Andy
|
|
|
coozer
|
| posted on 7/9/09 at 07:56 PM |
|
|
Test drive? is he coming up before you rip it out?
Steve
1972 V8 Jago
1980 Z750
|
|
|
lotusmadandy
|
| posted on 9/9/09 at 06:46 PM |
|
|
Indeed he is Steve, on sunday morning
he will be here around 9am.We will go out for a drive then whip it out of the bay and into the boot of his big car.
I will give a couple of the neighbours a knock for some extra hands into the boot.
Unless of course you have a couple of hours free on sunday morning
Andy
|
|
|
kj
|
| posted on 10/9/09 at 06:40 AM |
|
|
Not be long then before your new one is in and running, you got it all sorted now?
Think about it, think about it again and then do it.
|
|
|
lotusmadandy
|
| posted on 10/9/09 at 07:53 PM |
|
|
Hi mate just need the sump fitted and its ready to go in
Roll on next week.
Andy
|
|
|
