NigeEss
|
| posted on 14/2/10 at 12:36 AM |
|
|
Anyone want to cut me some shapes out of 3mm plate
Need a few pieces of sheet steel cut. Could do it with the angry but it'll take ages.
About 16 pieces biggest (4 off) about 195x125 but has only one right angle.
Can supply dxf file or sketch.
Anyone fancy it ?
Nige
[Edited on 14/2/10 by NigeEss]
|
|
|
|
|
bigsteve
|
| posted on 14/2/10 at 08:02 AM |
|
|
do you already have the steel? we have a big guillotine at work and would be happy to go in one weekend and chop them for you. based in preston if
thats not too far
steve
|
|
|
Miks15
|
| posted on 14/2/10 at 08:07 AM |
|
|
try andyw7de he has a water cutter and willl be happy to cut them out for you im sure, ive always had good cheap quick servivce from him
|
|
|
trikerneil
|
| posted on 14/2/10 at 03:45 PM |
|
|
He did a cracking job for me
Neil
ACE Cafe - Just say No.
|
|
|
NigeEss
|
| posted on 14/2/10 at 05:47 PM |
|
|
Thanks Bigsteve, thanks for the offer but I'd have to get some and don't need much.
Will bear you offer in mind though.
Will try Andyw7de as suggested as he's likely to have stock.
Nige
[Edited on 14/2/10 by NigeEss]
|
|
|
bigsteve
|
| posted on 14/2/10 at 06:29 PM |
|
|
no worries. we usually have 3mm steel im stock but if your after various shapes i cant do them on the guillotine. straight cuts are no problem. if you
get stuck i can sort you out with the steel
|
|
|
