neilp1
|
| posted on 4/4/14 at 07:38 PM |
|
|
Side repeater position
One of my next jobs is the side repeaters. I was planning on fitting them to the outside edge of the front cycle wings.
I have read the IVA manual, but it doesn't really state where they have to be. I have done a search on here, but couldn't find anything to
say not to put them on the front wings.
Cheers,
Neil
|
|
|
|
|
coozer
|
| posted on 4/4/14 at 07:41 PM |
|
|
Does it not say what the viewing angles need to be in the manual?
Then you can work out the best position, or , have look at the recent pass photos on here, or even the fails if that wasnt an issue?
1972 V8 Jago
1980 Z750
|
|
|
rash12
|
| posted on 4/4/14 at 07:44 PM |
|
|
back arches seems to be the favourite at the mo when I asked
|
|
|
neilp1
|
| posted on 4/4/14 at 07:46 PM |
|
|
quote:
Originally posted by rash12
back arches seems to be the favourite at the mo when I asked
Don't want to mount on rear arches if possible.
|
|
|
theduck
|
| posted on 4/4/14 at 07:56 PM |
|
|
Front cycle wings is fine. Indicators are tested with wheels straight ahead and visibility is 5-60degrees rearward. Is all voveref in IVA manual will
check section an post back.
|
|
|
neilp1
|
| posted on 4/4/14 at 07:59 PM |
|
|
quote:
Originally posted by coozer
Does it not say what the viewing angles need to be in the manual?
Steve,
here is what the manual says-
Angles of visibility
a. Horizontal
i. 80deg outwards 45deg inwards.
ii. < 750mm above the ground 20deg inwards
iii. (SIDE REPEATER) To the rear between 5deg and 60deg outboard.
b. Vertical
i. < 750mm above the ground 15deg above and 5deg below horizontal.
ii. Otherwise 15deg above and below horizontal.
I can't understand what/where these are taken??
|
|
|
theduck
|
| posted on 4/4/14 at 08:00 PM |
|
|
Page 186 of latest pdf
Or
Section 23 page 2 of 4 if printed
|
|
|
theduck
|
| posted on 4/4/14 at 08:03 PM |
|
|
Must type faster...
The side repeaters can be at any height and on the outer edge if cycle wings is ideal as generally this is widest point of car.
|
|
|
coozer
|
| posted on 4/4/14 at 08:03 PM |
|
|
quote:
Originally posted by neilp1
quote:
Originally posted by coozer
Does it not say what the viewing angles need to be in the manual?
Steve,
here is what the manual says-
Angles of visibility
a. Horizontal
i. 80deg outwards 45deg inwards.
ii. < 750mm above the ground 20deg inwards
iii. (SIDE REPEATER) To the rear between 5deg and 60deg outboard.
b. Vertical
i. < 750mm above the ground 15deg above and 5deg below horizontal.
ii. Otherwise 15deg above and below horizontal.
I can't understand what/where these are taken??
All this to come too....
1972 V8 Jago
1980 Z750
|
|
|
The Black Flash
|
| posted on 4/4/14 at 09:37 PM |
|
|
Outside edge of front wings is fine.
|
|
|
renetom
|
| posted on 5/4/14 at 06:39 AM |
|
|
repeaters
Having failed iva the 1st time round
Mr IVA man told us to put them here.
Passed fine second go.
 
Description
 
indicators
good luck.
[Edited on 5/4/14 by renetom]
|
|
|
snapper
|
| posted on 5/4/14 at 06:43 AM |
|
|
I've seen them fitted to headlight bowls and pass
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
AvonJas
|
| posted on 5/4/14 at 06:49 AM |
|
|
Passed last year with mine on the outside edge of cycle wings
|
|
|
CosKev3
|
| posted on 5/4/14 at 09:05 AM |
|
|
quote:
Originally posted by renetom
Having failed iva the 1st time round
Mr IVA man told us to put them here.
Passed fine second go.
good luck.
[Edited on 5/4/14 by renetom]
where did you have them on the first test to fail please?
|
|
|
renetom
|
| posted on 5/4/14 at 05:08 PM |
|
|
Hi
I took great pains to fit them on the front roll cage tubes
Drilling & fishing for the wires inside the tubes for neatness.
Then then bastard failed them, was I chuffed ?
 
Modified Yamaha airbox
Good luck
René
|
|
|
serieslandy
|
| posted on 5/4/14 at 06:38 PM |
|
|
I wanted mine on the scuttle but couldn't due to the angles. 5deg out was fine but the 5deg down meant that the arch was in the way.
I ended up putting Button 12v Amber LED CLEAR Side Indicator light/Repeater/kit car westfield/dax in the arches but removed
the rubber bits.
If you do put them in the arches they must be a maximum of 2.6m from the front of the car.
HTH, Steve
[Edited on 5/4/14 by serieslandy]
|
|
|
DavidW
|
| posted on 6/4/14 at 05:58 AM |
|
|
I passed IVA with them on the outside edges of the front cycle wings.
David
|
|
|
SteveWallace
|
| posted on 6/4/14 at 07:10 AM |
|
|
Whilst I didn't pass my IVA on Friday, he had no problem with where I put my LED side repeaters as shown in this picture. They only test the
angles with the wheels pointing straight forward so as long as you position them so that the 5 degree angle to the rear clears the rear arches at
their widest point you should be fine.
By the way, don't use chocolate block connectors. I used them in a couple of places and it would have been a fail had he not let us change them
on the day.
 
Description
|
|
|
dunk3
|
| posted on 6/4/14 at 07:16 AM |
|
|
I put mine on the side of the front cycle wing and passed IVA with no probs. some pics in my archive under mk indy full view.
[Edited on 6/4/14 by dunk3]
|
|
|
loggyboy
|
| posted on 6/4/14 at 07:54 AM |
|
|
quote:
Originally posted by renetom
Hi
I took great pains to fit them on the front roll cage tubes
Drilling & fishing for the wires inside the tubes for neatness.
Then then bastard failed them, was I chuffed ?
Modified Yamaha airbox
Good luck
René
On what basis did he fail them?
Mistral Motorsport
|
|
|
renetom
|
| posted on 6/4/14 at 08:08 AM |
|
|
He failed them on front visibility, I then suggested small aly shrouds, he said no
Then said the radiuses were borderline.
Basicly he did not like them there, & whatever he was going to fail them.
I feel sure that another place & time they would have passed.
But what the man say's goes,
|
|
|
CosKev3
|
| posted on 6/4/14 at 08:21 AM |
|
|
quote:
Originally posted by renetom
He failed them on front visibility, I then suggested small aly shrouds, he said no
Then said the radiuses were borderline.
Basicly he did not like them there, & whatever he was going to fail them.
I feel sure that another place & time they would have passed.
But what the man say's goes,
From what I've seen/read on here the side repeaters don't get checked for visibility from the front?
Steve Wallace's Viento has them on the rear face of front cycle wings, and it didn't fail on them Friday just gone.
|
|
|
neilp1
|
| posted on 6/4/14 at 07:10 PM |
|
|
Guys thanks for the replies. I have now fitted them to the outside edge of the front cycle wings.
|
|
|
