Hellfire
|
 posted on 13/11/04 at 08:32 PM |
|
|
Brake Bias Mechanism
How many of us have used a Brake Bias Mechanism?
Hopefully - there should be some option for everyone... 
|
|
|
|
|
colibriman
|
| posted on 13/11/04 at 08:44 PM |
|
|
I've bought one but not fitted it yet...after today on the track I might not bother....brakes were great - got 4 pots on the front and sierra
calipers on the back, balance seemed fine to me
need a bike engine? - www.colibriman.com
SVA ready Mk Indyblade possibly for sale.....if the offers good...!
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Mark Allanson
|
| posted on 13/11/04 at 08:46 PM |
|
|
I have a Fiat Uno bias valve, at the moment it is screwed all the way in (no bias) and the rear wheels do lock up before the fronts - just.
I will set it best I can before the SVA and then fit a roll pin at the SVA itself once the examiner is satisfied
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
mookaloid
|
| posted on 13/11/04 at 09:06 PM |
|
|
I haven't used either a valve or a mechanical system, and I have a CEC which answer should I give?
By the way my brakes seem pretty good
|
|
|
paulf
|
| posted on 13/11/04 at 09:34 PM |
|
|
Ive used a Sierra master cylinder m16 callipers and 3/4 rear cylinders , the brake balance is fine . i had no SVA problem and find that the fronts
always lock up first.
Paul.
|
|
|
macspeedy
|
| posted on 13/11/04 at 09:45 PM |
|
|
i have no bias systems, drums rear discs front no problems, didn't read it proparly and voted for the
No I haven't used a Brake Bias Valve - I have a CEC
passed sva no prob
|
|
|
wilkingj
|
| posted on 13/11/04 at 10:18 PM |
|
|
I have a std Luego pedal box. witha bias bar and two cylinders.
Whats CEC and BEC?. I though BEC was Bike Engined Car.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
Hellfire
|
| posted on 13/11/04 at 10:47 PM |
|
|
quote:
Originally posted by wilkingj
I have a std Luego pedal box. witha bias bar and two cylinders.
Whats CEC and BEC?. I though BEC was Bike Engined Car.
BEC = Bike Engined Car
CEC = Car Engined Car 
|
|
|
britishtrident
|
| posted on 2/12/04 at 01:50 PM |
|
|
CEC no bias valve but as I am only using Escort 8" Mk1 drums with 0.7" wheel cylinders I don't expect any problems -- if I do I
will just fit smaller 0.625" wheel cylnders
[Edited on 2/12/04 by britishtrident]
|
|
|
.jpg)
