gaz_gaz
|
posted on 30/10/17 at 08:08 PM |
|
|
double P clips ok for IVA
Do we think these double 8mm O/D, P clips will be ok for fuel lines come IVA time?
https://www.carbuildersolutions.com/uk/stainless-steel-p-clips-twin-8mm-od
|
|
|
ste
|
posted on 30/10/17 at 10:56 PM |
|
|
I wouldn't use them for any job. they are just asking for trouble down the line with any friction causing the two pipes to wear through over
time.
|
|
avagolen
|
posted on 31/10/17 at 08:17 AM |
|
|
2 'P' clips with a single fastener works well.
The Answer for everything, but never the last word....
|
|
loggyboy
|
posted on 31/10/17 at 09:25 AM |
|
|
I can see no issues with IVA, as long as they are secure.
Wear over time would be considered acceptable, providing its not premature wear, ie multiple years later not months!
As above though - I went for the twin Pclip route. Looks tidier.
[Edited on 31-10-17 by loggyboy]
Mistral Motorsport
|
|
nick205
|
posted on 31/10/17 at 09:46 AM |
|
|
quote: Originally posted by loggyboy
I can see no issues with IVA, as long as they are secure.
Wear over time would be considered acceptable, providing its not premature wear, ie multiple years later not months!
As above though - I went for the twin Pclip route. Looks tidier.
[Edited on 31-10-17 by loggyboy]
This would be my preference as well - 2x rubber lined single P clips with 1x fixing.
|
|
Angel Acevedo
|
posted on 31/10/17 at 03:05 PM |
|
|
A small piece of PVC or rubber hose inserted on one of the two lines wil remove all traces of wear..
Or most of it.
Beware of what you wish.. for it may come true....
|
|
tims31
|
posted on 1/11/17 at 12:27 PM |
|
|
I used these double clips, hold the pipe secure and neatly
Description
Build: http://www.martinsfurybuild.co.uk/
|
|
Angel Acevedo
|
posted on 1/11/17 at 03:27 PM |
|
|
quote: Originally posted by tims31
I used these double clips, hold the pipe secure and neatly
Description
Neat labels....
How did you make them?
Thanks.
Beware of what you wish.. for it may come true....
|
|