mike-ktm
|
| posted on 18/1/07 at 12:51 PM |
|
|
Air Tools
Currently looking to source a 1/2" Impact Gun and a 3/8" air ratchet
What've people got for sale ? I know they're not that expensive for new stuff (Clarke etc.) but I could do without spending much really
U2U if you have anything.
Cheers,
Mike
[Edited on 18/1/07 by mike-ktm]
|
|
|
|
|
emsfactory
|
| posted on 18/1/07 at 12:56 PM |
|
|
I have some air chisels?
|
|
|
twybrow
|
| posted on 18/1/07 at 01:16 PM |
|
|
I can sell you a bag full of air for them if you want?
|
|
|
britishtrident
|
| posted on 18/1/07 at 01:18 PM |
|
|
BIG COMPRESSOR NEEDED
|
|
|
mike-ktm
|
| posted on 18/1/07 at 01:38 PM |
|
|
I understand all the usage implications, most seem to require around 6-7 cfm which my compressor can supply no problem.
C'mon guys, helpful comments to the task in hand only please 
Thanks,
Mike
|
|
|
the_fbi
|
| posted on 18/1/07 at 02:21 PM |
|
|
I know £15 is £15, but given that they'll be new with a warranty, personally I'd just buy something from the vast choice on eBay at that
pricepoint.
If you want it to last forever then you'll be spending mega bucks, but for £15 and a years warranty you can't go wrong.
|
|
|
mike-ktm
|
| posted on 18/1/07 at 02:45 PM |
|
|
Link to the £15 ones please ?
|
|
|
scottc
|
| posted on 18/1/07 at 02:50 PM |
|
|
Even has a red halo
lin
ky
|
|
|
iank
|
| posted on 18/1/07 at 03:01 PM |
|
|
a little more expensive, but the transtools stuff I've had has been fine
http://cgi.ebay.co.uk/3-8-Square-Drive-Air-Ratchet-Wrench_W0QQitemZ190041825771QQihZ009QQcategoryZ22664QQtcZphotoQQcmdZViewItem
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
Aboardman
|
| posted on 18/1/07 at 03:20 PM |
|
|
or get impact, rachet and hammer
http://cgi.ebay.co.uk/NEW-3-AIR-1-2-IMPACT-WRENCH-3-8-RATCHET-150MM-HAMMER_W0QQitemZ290071016804QQihZ019QQcategoryZ30906QQrdZ1QQcmdZViewItem
note i think for 1/2 impact you should be using 10mm hose?
[Edited on 18/1/07 by Aboardman]
|
|
|
big_wasa
|
| posted on 18/1/07 at 05:20 PM |
|
|
I have an 1/2 impact wrench you could have collected for free if you was nearer
I was given it and dont need it, dont even know if its any good.
|
|
|
JoelP
|
| posted on 18/1/07 at 07:31 PM |
|
|
quote:
Originally posted by Aboardman
or get impact, rachet and hammer
http://cgi.ebay.co.uk/NEW-3-AIR-1-2-IMPACT-WRENCH-3-8-RATCHET-150MM-HAMMER_W0QQitemZ290071016804QQihZ019QQcategoryZ30906QQrdZ1QQcmdZViewItem
note i think for 1/2 impact you should be using 10mm hose?
[Edited on 18/1/07 by Aboardman]
From my limited sucess, i think any air tools benefit from 10mm hose.
For more demanding jobs, i use two compressors and a Y piece to combine the pipes at the tool.
[Edited on 18/1/07 by JoelP]
|
|
|
mike-ktm
|
| posted on 18/1/07 at 08:11 PM |
|
|
Appreciate the offer there Big Wasa !  If you can check if it works - more than happy to pay for postage and include a drink ?
Cheers,
Mike
PS - Totally agree boys - 10mm ID hose as a minimum for big consumption air tools !
|
|
|
PeterW
|
| posted on 19/1/07 at 07:46 AM |
|
|
Halfrauds have this set
here for £80 at the moment
Seems good value as its got impact sockets etc in it
Cheers
Peter
|
|
|
mike-ktm
|
| posted on 19/1/07 at 07:48 AM |
|
|
I'll check that out, thanks.
If it's £80 in my local Halfrauds - they'll have 1 less this afternoon !
Cheers
|
|
|
