tks
|
posted on 23/4/07 at 04:56 PM |
|
|
Q Plate and emissions
Wich emissions are now needed to be passed when engine is after 1995
Also how are they measured?
at idle?
and at 75% max rpm?
Tks
[Edited on 23/4/07 by tks]
The above comments are always meant to be from the above persons perspective.
|
|
|
esn163
|
posted on 23/4/07 at 05:10 PM |
|
|
Hi
See link
Noise is at 3/4 max power
HTH
Ed
Indy Build Photos
** Build pages **
Photo Bucket Pics
|
|
tks
|
posted on 23/4/07 at 05:51 PM |
|
|
thanxs mate..
Tks
The above comments are always meant to be from the above persons perspective.
|
|
saigonij
|
posted on 24/4/07 at 06:32 AM |
|
|
if noise is at 3/4 of max RPM, this i guess comes from your submissions on the SVA application form, therefore ,
can you specify a lower top RPM, e.g. 4500 and therefore put the noise reading taken at a lower RPM?
|
|
Schrodinger
|
posted on 24/4/07 at 06:42 AM |
|
|
IIRC it's not max RPM but 3/4 of RPM for max power.
|
|
saigonij
|
posted on 24/4/07 at 07:19 AM |
|
|
ok, so could you specify max power at a lower RPM? e.g. say, my max power is at 4500 rpm?
|
|
chockymonster
|
posted on 24/4/07 at 08:09 AM |
|
|
quote: Originally posted by Schrodinger
IIRC it's not max RPM but 3/4 of RPM for max power.
It was on the old form, but when I filled mine out I put max power at 10,000 rpm, when I got my declaration through it said the rpm is the max rpm,
not the rpm at max power.
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|