Fatgadget
|
posted on 15/6/07 at 03:46 PM |
|
|
So your car is the real Mcoy?
Think again !
|
|
|
02GF74
|
posted on 15/6/07 at 03:57 PM |
|
|
that is quite naughty that is but so what, evey chinese takeaway does a reasonable copy of chinese food, tasty but not quite the real mcoy (cow
stomach soup) and noone's complained so far.
|
|
chriscook
|
posted on 15/6/07 at 04:03 PM |
|
|
You can swap the doors over between a Chery QQ and a Daewoo Matiz and they fit perfectly. ISTR Chery even managed to start selling the QQ in China
before Daewoo started selling the Matiz there.
|
|
nib1980
|
posted on 15/6/07 at 04:09 PM |
|
|
worse the landwind (frontera copy), was crash tested, and ADAC, said if possible thed have given it a negative star rating, I saw the video, and i was
scared, and I crash cars for a living. basically they had deleted any reinforcing bracket they thought they didn't need
see the video here
http://www.youtube.com/watch?v=f7Ts94rjr4M
http://www.youtube.com/watch?v=DZWy_fASSiQ&mode=related&search=
[Edited on 15/6/07 by nib1980]
[Edited on 15/6/07 by nib1980]
[Edited on 15/6/07 by nib1980]
[Edited on 15/6/07 by nib1980]
|
|
Fatgadget
|
posted on 15/6/07 at 04:10 PM |
|
|
Brings a whole new meaning to:.."Is it real or is it memorex"!
|
|
nick baker
|
posted on 15/6/07 at 04:23 PM |
|
|
If you look for "Bugging the boardroom" (radio broadcast on BBC radio 4) you might still find a 2-part series about Chinese industrial
espionage.
In my line of work we try to keep our secrets from thier similar business areas, and once found a complete duplicate of one of our machines installed
in china. It was complete with holes in the frame where a concept had been installed during the development stage , but never put into production. The
mounting holes were redundant but left in teh frame for some reason. The chinese had duplicated them too...
Funnilly enough, the customer baught our machien to replace it as the carbon Copy machien had never worked. The software and the tolerances were WAY
out. They'd obviously got the design - but no software - and had it made by a sub-standard manufacturer. Gits.
|
|
smart51
|
posted on 15/6/07 at 05:01 PM |
|
|
The last company I worked for was asked to go an service a machine in South America somewhere - a market we never sold into. It was an exact copy,
including the company's name badge with address and phone number. We knew it wasn't one of ours as we made bespoke machines and only ever
duplicated if a customer wanted two the same.
|
|
millenniumtree
|
posted on 15/6/07 at 06:23 PM |
|
|
That's incredible!
The attention to detail of the copies is really something. They're probably just taking the replacement parts they already make for export and
sticking them on a new chassis. The only problem is you get a car made ENTIRELY from cheap replacement parts that are almost never made to the
specifications and quality of the original part!
I suppose this is what you get when your government actively discourages independent creative thought!!
For the cars, I think it can be explained at least partially by the replacement parts market, but for bespoke equipment and machines?? All I can say
is WOW!
|
|
joneh
|
posted on 15/6/07 at 06:50 PM |
|
|
I bought a Colin Klein T shirt once
|
|
t.j.
|
posted on 15/6/07 at 07:18 PM |
|
|
quote: Originally posted by nib1980
worse the landwind (frontera copy), was crash tested, and ADAC, said if possible thed have given it a negative star rating, I saw the video, and i was
scared, and I crash cars for a living. basically they had deleted any reinforcing bracket they thought they didn't need
see the video here
http://www.youtube.com/watch?v=f7Ts94rjr4M
http://www.youtube.com/watch?v=DZWy_fASSiQ&mode=related&search=
Copies are in most cases worse than the orginal. I personal don't like the look of the vauxhall either:
vauxhall frontera
:-(
[retest landwind at same conditions as vauxhall
http://www.jmclandwind.nl/live.php?stream=driversside
[Edited on 15/6/07 by t.j.]
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
fesycresy
|
posted on 15/6/07 at 07:28 PM |
|
|
Just saw the videos. That's not going to polish out is it
Didn't someone test a new people carrier against an old Disco and the new car was much better ?
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
chriscook
|
posted on 15/6/07 at 07:30 PM |
|
|
In China they don't have so many options for high strength steels which are used fairly extensively in modern cars. This severely limits their
crash performance and the use the same design but make it from cheese instead.
|
|
t.j.
|
posted on 15/6/07 at 07:38 PM |
|
|
my advise:
Buy a heavy, large, big, long car which will push everything away when you hit it.
Better hit nothing,
BTW; how does the locost performe in NCAP
But hey a motorcycle or quadracycle is also not the best thing to have if you're gonna kiss a wall at 56 km/h
[Edited on 15/6/07 by t.j.]
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
Browser
|
posted on 16/6/07 at 07:51 AM |
|
|
A friend told me recently that the Chinese government bought a shedload of GE frame 6 gas turbines for power generation a while back and all but one
were installed for their intended use. The last one never saw the light of day and questions asked as to it's whereabouts were met by
generations-old Chinese inscrutability.
Some while later the vendor got to hear about a new Chinese-built GT, which bore a remarkable resemblance to the GE frame 6 machine, coming out in
China, making it obvious that thye'd reverse-engineered the 'disappeared' machine. Due to the lack of specialist steels and alloys,
however, their version's apparrently crap!
|
|