StevieB
|
| posted on 14/8/07 at 10:55 PM |
|
|
Mounting original bike switches
I'm planning on using the bike switchgear on my car (at least for the time being for simplicity and because I already have them), but alos
fitting a paddle shift.
What do people reckon about the chances of passing SVA with an arrangement similar to the one in this piccy:
 
Rescued attachment Menace Interior.jpg
|
|
|
|
|
macdave69
|
| posted on 14/8/07 at 11:03 PM |
|
|
I did mine like this using a suitable diameter clip on (TL1000 in my case) fastened to the paddle shift column thingy
It all fits inside the 127mm exclusion zone
hth
Dave
 
Description
[Edited on 14/8/07 by macdave69]
[Edited on 14/8/07 by macdave69]
|
|
|
StevieB
|
| posted on 14/8/07 at 11:07 PM |
|
|
Very neat - I was thinking about putting a joystick type arrangement where the gear stick wuld normally be, but that looks a much neater and SVA
friendly solution!
|
|
|
locoboy
|
| posted on 15/8/07 at 06:13 AM |
|
|
This is what i did,
[img][/img]
ATB
Locoboy
|
|
|
