RobH
|
| posted on 10/10/07 at 08:41 PM |
|
|
Will indicators pass?????
I have bought these indictors but I’m not sure if they will pass SVA because there is no sign of an “E” mark on the lens, and the radius on the rear
of the body seems a bit small.
The very well known and reputable company I bought them from said, “they are fine for SVA”, but I have read that all the lights must have an “E” mark
on the lens. The last thing I want is to fit them only to have them fail.
Has anyone out there fitted these indicators and had them pass or fail.
Thanks Rob
 
Description
 
Description
 
Description
 
Description
|
|
|
|
|
caber
|
| posted on 10/10/07 at 08:51 PM |
|
|
I hope these will pass its what I have on mine, I'll be able to tell you in a few weeks!
Caber
|
|
|
RazMan
|
| posted on 10/10/07 at 08:57 PM |
|
|
You don't neccessarily need an E mark on them to pass SVA as long as they are deemed as 'suitable' by Mr SVA.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
JohnN
|
| posted on 10/10/07 at 09:17 PM |
|
|
I had some smaller ones, SVA weren't bothered about the lack of E marking, but pronounced them too dim and suggested I'd probably find
they didn't have any reflectors inside (which they didn't). Fitted some salvaged from a torch and they were then deemed OK.
|
|
|
caber
|
| posted on 10/10/07 at 11:14 PM |
|
|
Mine don't have reflectors I guess something else to make!
Caber
|
|
|
mookaloid
|
| posted on 10/10/07 at 11:48 PM |
|
|
Tin foil?
Locost solution 
"That thing you're thinking - it wont be that."
|
|
|
marshall
|
| posted on 11/10/07 at 05:44 AM |
|
|
hi i used them on my tiger Avon an they passed ok. i did not have to mke them longer in any way.just put them on have a look in my photo Archive
there might be a picture in there. good luck on the day....
|
|
|
RobH
|
| posted on 11/10/07 at 07:03 PM |
|
|
Thanks for the replys guys.
I think I will go for it and just fit them.
Rob
|
|
|
Steve @ sVc
|
| posted on 26/10/07 at 12:51 PM |
|
|
Yes Rob, if fitted in-line with the SVA, ie no more inwards than 400 mm from the widest part of the car (this may be the rear wheels).
They have been supplied to both builders and kit makers for a few years and never had a fail reported to us.
You could have phoned us you know!
Regards
Steve @ sVc
|
|
|
saigonij
|
| posted on 26/10/07 at 01:43 PM |
|
|
im using Landrover ones, and they dont have reflectors on the inside either....
is this a common problem / something to look out for?
|
|
|
Steve @ sVc
|
| posted on 29/10/07 at 01:14 PM |
|
|
Souldn't be a problem. Caterham - Westfield etc etc,l use these "Land Rover" type indicator lights. They are not fitted with a
reflector
Regards
Steve @ sVc
|
|
|
.jpg)
