Razor
|
posted on 26/6/08 at 06:58 PM |
|
|
Head lights
May sound like a daft question, but what are the size requirments for front head lights, ive seen some 4 inch head lights but would these be ok as
most ppl have 5 and 3 quaters?
|
|
|
richardh
|
posted on 26/6/08 at 07:32 PM |
|
|
cant see why not
as long as the beam is of righ power wattage etc ....................
i saw a 7 type with some oblong ones about 3 inches tall ........................
|
|
iank
|
posted on 26/6/08 at 07:40 PM |
|
|
4" are motorbike lights and aren't guaranteed to pass SVA as they dip straight. Though Russbost has a mod that may let them pass
assuming the tester doesn't require the correct arrow mark for left dip.
Do a search it's been talked to death.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
iscmatt
|
posted on 27/6/08 at 02:35 AM |
|
|
yup i modded mine my own way and passed no probs. took 5 mins to do.
|
|
Hammerhead
|
posted on 27/6/08 at 09:49 AM |
|
|
quote: Originally posted by iscmatt
yup i modded mine my own way and passed no probs. took 5 mins to do.
care to share what you did?
|
|
iscmatt
|
posted on 27/6/08 at 09:39 PM |
|
|
there is a small nodule on the bottom of the lens which keeps the lens and dip pattern straight and flat. This little nodule needs to be gotton rid
of, i used a dremmel, and then the lens can be rotated by around 3-4 degrees so that the beam points to the left. Done
|
|