scoop
|
| posted on 1/7/08 at 04:41 PM |
|
|
VIN plate letter/number size...
I now have my VIN number and am just about to make the plate and stamp the chassis but, is there a letter/number size required before i start bashing
away? Nothing stated on the letter or the SVA manual that i can see. Just checkin'.
Cheers,
Steve.
|
|
|
|
|
Paul TigerB6
|
| posted on 1/7/08 at 04:44 PM |
|
|
5mm from memory i believe - have you tried a search here??
|
|
|
BenB
|
| posted on 1/7/08 at 04:47 PM |
|
|
For what it's worth I used
http://www.screwfix.com/prods/92801/Hand-Tools/Punches-Marking/Letter-Number-Stamp-36Pc
4mm and no complaints from SVA or DVLA man....
|
|
|
scoop
|
| posted on 1/7/08 at 05:31 PM |
|
|
If only i lived near a screwfix. I do begrudge paying that for delivery. Im sooo tight!
I have borrowed my mates set but he has 5mm letters and 3mm numbers. Doesnt look right on trial run.
I have searched but there is never an absolute answer. I think ill ring the SVA centre in Norwich tomorrow and find out. I will post the answer i get
on here.
Dont suppose anyone lives near that has a set
[Edited on 1/7/08 by scoop]
|
|
|
iank
|
| posted on 1/7/08 at 06:13 PM |
|
|
Not less than 4mm
Section 22.2 of the SVA manual (it's in the pdf draft)
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
scoop
|
| posted on 1/7/08 at 07:36 PM |
|
|
You are the man.
Ta very much for that
|
|
|
