Hi all,

I have been trying to fit the sierra master cylinder to the Robin hood pedal box assembly and as you might expect the holes in the RH assembly dont match the sierra fixings holes.

Does anyone know what the spec the standard sierra master cylinder and if there are any other master cylinders i can use in its place? For info the fixings in the pedal box are in the 6 and 12 o'clock positions and not rotated as the sierra one is.

Thanks in advance for any advice.

P.s. the car will need to be SVA ok so I need to keep the low fluid sensor etc.

Cheers

Chris

There are 4 variants of the sierra MC, you may have the wrong one

Do any of these 4 different master cylinders have the fixing lugs at the 6 and 12 o'clock positions or are they all rotated by 30 odd degrees??

Cheers

Chris

there are at least 2 variants. mine my havethe lugs at 12/6 o'clock bout I won;t be able to check un til Wed next week. u2u me then if you want me to check.