Im looking for drawings,(cut a way drawing) of Triumphs Herald, Spitfire or/and GT6 front suspension. Parts like uprights and hubs are also welcome.

Has anyone some workshop manual to scan?

This any good? http://www.rimmerbros.co.uk/rimmer/triumph/tr6/susp-front
Rescued attachment 66a.gif

Somewhere I have a workshop manual if you need further info. The Rimmer one looks pretty comprehensive though.
BTW if you aren't aware of it the bottom trunnions need oil not grease.
HTH
Cheers, Pewe

That's quick

The rimmerbros is usefull, but Im looking for drawings without perpectives so I can put the whole thing in CAD.

hhmmm, pretty spot on.

http://www.lotuseuropa.org/images/WorkshopManual/S2_Section_C_-_Front_Suspension.pdf

Keep in mind the later Herald and Spitfire had the caliper bracket and steering as part of the main casting not bolt on parts.

Early Herald, and all GT6 & Vittesse used bolt fixings for steering arm and caliper mounting.

http://locostbuilders.co.uk/upload/lotus europa.jpg
http://locostbuilders.co.uk/upload/lotus europa2.jpg
http://locostbuilders.co.uk/upload/lotus europa3.jpg
http://locostbuilders.co.uk/upload/lotus europa4.jpg
http://locostbuilders.co.uk/upload/lotus europa5.jpg


[Edited on 27/1/09 by ettore bugatti]

[Edited on 27/1/09 by ettore bugatti]

When I had my TR6 i found the rimmer bros and Moss catalogues a lot better than the workshop manuals for information as they were a lot clearer.