does anyone have any dwawings for the rear of the chassis for independant rear suspension setup?? main chassis is nearly done so now i need the drawings for the rear. im using sierra hubs. Theres a picture of a locost in ron champions book with irs but you cant see much of it. Thanks. John.

think ive found the correct details now but any info anyone has would be appreciated!!!

here they are chaps


http://kit-car.org/Files/suspension/RortyLocostIRSAssembly.pdf

there are some good drawings in the new haynes manual. you would have to change a couple of dimensions due to your chassis being a slightly different size but that shouldnt be an issue.

Hi,
Please be careful with what you want to make.

Because it is a "locost" doesn't need to be a LOW Design.
So there is no way that you can pick this chassis with some front suspension and than pick this or that rear suspension.

It takes a lot of time to have a good definition of the suspensions so I would advise to walk a way that has the full definition of the car. Stick to that plan and once it drives adjust to your needs.

Chris Gibbs [Haynes publications] book will give you a neat result.
Always better than make combination's of suspensions.

It is not clear what you have, Ron Champion design or a "+4" as you sign.

Sorry if it sound negative but it is NOT.

Regards,
Cobra289