I've now got the new Fiesta MC fitted and need to link the fork on the end of the pushrod to the pedal. The pedal has a vertical slot in it (M8 dia x25mm ish) and the pushrod will take a 10mm clevis pin.

Does anyone know what the standard setup looks like? (A photo of what Mr Ford uses would really help )


Brake MC

[Edited on 24/3/09 by Eggy]

[Edited on 24/3/09 by Eggy]

looks like your master cyl goes on the n/s of the car operated via a bar bolted to the bulkhead,the pedal is prob from a mk 1 with no servo

Looks like I'll be making something up at work on Thursday

Block with a radius'ed end, tapped hole and an M8 stud?

This is the setup for the Cortina which is similar to the Fiesta


[img][/img]



[Edited on 25/3/09 full size image in my Archiveby robinj66]

[Edited on 25/3/09 by robinj66]