IM using a sierra master cylinder and following the designs of the haynes pedal box. I cant see it says anywhere about the clevis and pushrod?

Anyones got any pics of theirs?

Also does it need to be adjustable or is a solid one good enough?

Thanks

Mikkel

Personally I went for an adjustable length push rod... just to give me a little bit of extra flexibility.

I made my own pedals, I used the clevis pin and saddle and half the rod from the Micra pedal set I was originally going to use and I welded that to end of the adjustable Sierra pushrod.

HTH,
James

Miks,

I just checked the book... page 108 has pics and dimensions of the rod.

Cheers,
James

Cheers james, will check it later tonight,