Board logo

I need some help with a Horn button
Antnicuk - 29/4/09 at 08:05 PM

I have just bought a new, well nearly, steering wheel but it has no horn. I have seen momo and omp horn buttons on ebay but not sure if they will fit.

Is there a set size like the bosses? is the hole in the middle always the same size, and how do the Momo type ones attach to the wheel?

I know some have a ring that holds it which is bolted with the same bolts that hold the wheel to the boss but i dont really want that type.

omega 24 v6 - 29/4/09 at 08:10 PM

quote:

I know some have a ring that holds it which is bolted with the same bolts that hold the wheel to the boss but i dont really want that type.


Well thats how my Momo one is held in can send a piccy / sizes tommorrow if you need

Antnicuk - 29/4/09 at 08:34 PM

quote:
Originally posted by omega 24 v6
quote:

I know some have a ring that holds it which is bolted with the same bolts that hold the wheel to the boss but i dont really want that type.


yes please, i should clarify, if there is a ring between the wheel and boss then thats fine, but if it sits over the horn on the outside of the steering wheel i would prefer not.

The diameter of my hole is 56mm.

Richard Quinn - 29/4/09 at 08:39 PM

quote:
Originally posted by AntnicukThe diameter of my hole is 56mm.
Mine felt like that the last time I had a Vindaloo

omega 24 v6 - 29/4/09 at 09:19 PM

quote:

yes please, i should clarify, if there is a ring between the wheel and boss then thats fine, but if it sits over the horn on the outside of the steering wheel i would prefer not.


Yes the ring is sandwiched between the wheel and the boss. I'll get piccies and sizes for you tomorrow evening.

Colnago_Man - 30/4/09 at 07:41 AM

Antnicuk , I have a spare Momo horn button (Yellow) you can have real cheap. If it doesnt fit just send me it back.

Can get you sizes if you want.