Finally managed to get my hands on some shiny wheels, but on putting them on my hubs (just test fitting) there seems to be a 4-5mm gap between the hub and the wheel, despite the front bit of the hub being snug to the centre cut-outy-bit of the wheel.





Do I just need a spacer, or have I buggered up somewhere?

Cheers

Have they got spigot rings in the middle of the wheels??

They could be the wrong size centre for the hub and bottoming out on the flange.

looks like my rhs front wheel which I couldnt get to fit for the life of me.. until I figured out there was a small reducing ring fitted inside

quote:

---

Originally posted by Danozeman
Have they got spigot rings in the middle of the wheels??

They could be the wrong size centre for the hub and bottoming out on the flange.

---

whats it like with the disc on ?


or


got any pics with the wheel off?

I take it they are sierra hubs?

what kind of wheels are they?


[Edited on 13/5/09 by mcerd1]

they are sierra hubs, TD pro race 1.2s, 15" et38, apparently.

will get photos now.

[Edited on 13/5/09 by Staple balls]

edited ^^ (sorry I was a bit slow)


btw - the reducing rings should be 63.4mm for the sierra hubs

[Edited on 13/5/09 by mcerd1]

quote:

---

Originally posted by mcerd1
whats it like with the disc on ?

---

it took me a few minutes to work out what was missing in your pic

you can just see the 2 diamiters of these ones:
http://i5.photobucket.com/albums/y170/mcerd1/IMG_0090.jpg

haha, rob to the rescue!

quote:

---

Originally posted by mcerd1
whats it like with the disc on ?

---

quote:

---

Originally posted by Staple balls

quote:

---

Originally posted by mcerd1
whats it like with the disc on ?

---

HA!

I'm a twat.

Thanks

---