i have just bought a couple of replacement balljoints for the front end as my others were damaged and didnt trust the nut to stay on. I got these as link - Linky

however....the threaded end is too small to fit in the wishbone. can anyone recommend a site or something off ebay that will have the correct ones to fit a tiger avon? the ones i have bought were transit ones and cheap - the ones on the tiger site are expensive!

Rally Design are usually good for stuff like that

http://www.rallydesign.co.uk/

If the M18 ones are too small you need the later ones which were M20 x 1.5 and were I think track rod ends for the Mk3 Transit as opposed to drag links for the earlier model.
Ebay ones

cheers for your help - i will get the mk3 one from ebay

if anyone is interested in the older type let me know before i sent them back for a refund

joe

Hi,

Sorry to bring this thread back up but i used it to order my drag links but that ebay item has ended and the guy has run out (Got one off him, need two).... Do you guys think these will be the same?

http://cgi.ebay.co.uk/QR2226S-TRACK-ROD-END-FORD-TRANSIT-1986-1992_W0QQitemZ160343785359QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item 25553bff8f

Thanks
Stuart

No, that is for the track rod end rather than the drag link end. This is a useful list of manufacturers part numbers for the drag link end.

nice one cheers,

searched ebay inc descriptions and only found this

http://cgi.ebay.co.uk/Drag-Link-End-Rear-Ford-Transit_W0QQitemZ190354845754QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2c5208703a />
expensive though